Should be used：
The PP / HDPE woven fabric is used for knitting bags, cement bags, rice bags, flour bags, pet food bags, animal feed bags, fertilizer bags, chemical bags and other products.
Merit point：
● Fast working speed
● The quality of weaving is good.
● Low energy consumption
● Easy operation
● Good economic returns
Machine composition

Standard unit 01) frame 02) cheese stand 03) central drive system (small cam, A.C. motor) 04) active drive system driven by torque motor 05) broken wire detection system 06) broken weft detection system 07) weft detection system 08) shuttle assembly 09) shuttle runway 10) size ring, 1 (customer specified specification) 11) ingot storage tank 12) manual operation unit 13) cloth hoisting system (mechanical drive) 14) standard width of surface coiling 15) electronic meter 16) electrical and control system for circular looms

Optional units 01) direct drive motor 02) permanent magnet AC motor 03) frequency controlled active let off system. 04) independently driven cloth hoisting system. 05) folding M side device 06) single section device (heat / ultrasonic) 07) double section device (heat / ultrasonic) 08) two times the standard width of the surface coiler Distribution unit 09) second standard width surface coiler 10) frequency conversion control surface coiler 11) lining film unwinding unit

Main technical parameters：

Model	S-YZJ-850/8S
Number of shuttles	8　hold
Woven fabric folding diameter	350 - 850mm
speed *	150 Turn / minute
Frequency of weft picking *	1200 Second / minute
Weft density	20 - 55 Root /100 mm
Maximum warp number	720 root
Diameter of warp / weft bobbin	Ø38mm
Length of warp / weft bobbin	230mm
Maximum diameter of warp ingot	Ø120mm
Maximum diameter of warp ingot	Ø110mm
Length of warp / weft spindle	200mm
Main motor (A.C. motor)	2.2 / 3.0kw
Total power	2.7 / 3.5kw
weight	3000kg
Shape size（L×W×H）	9100×2410×3100mm

Remarks：
*The above data vary according to the weaving structure, the size and weight of the woven fabric, the specification and quality of the flat yarn.
　The tensile strength of flat wire should not be less than 4.5 g / Daniel, the elongation at break is 25%-30%.
** technical parameters and dimensions are subject to change without prior notice.
*** special specifications and versions of the models can be customized.